Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Install a NEW fuel tank fuel pump module O-ring gasket (1) to the fuel tank fuel pump module (2).
Courtesy of GENERAL MOTORS COMPANY
- Lower the fuel pump module (2) into the fuel tank while connecting the fuel tank vent pipe (1) to the fuel pump module. Refer to Plastic Collar Quick Connect Fitting Service.
Courtesy of GENERAL MOTORS COMPANY
- Install the fuel tank fuel pump module lock ring (1) to the fuel tank (2).
- Using the CH-45722
Fuel Pump Locking Ring Wrench and a long breaker-bar, rotate the fuel pump module lock ring (1) in a clockwise direction in order to lock the lock ring.
- Install the EVAP system hoses. Refer to Evaporative Emission System Hose/Pipe Replacement (2H0) Evaporative Emission System Hose/Pipe Replacement (Fuel Pump Module to Vent Pipe FWD) Evaporative Emission System Hose/Pipe Replacement (Fuel Pump Module to Canister FWD) Evaporative Emission System Hose/Pipe Replacement (Canister to Pipe FWD).
- Install the fuel feed pipe. Refer to Fuel Feed Pipe Replacement (2H0) Fuel Feed Pipe Replacement (At Tank FWD).
- Connect the electrical connector.
- Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement (AWD) .
- Install the fuel tank. Refer to Fuel Tank Replacement.