Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Propeller Shaft Slip Yoke Boot Clamp |
| Yoke Retainer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Propeller Shaft Bolt | 25 N.m (18 lb ft) |
| Rear Propeller Shaft Bolt | 25 N.m (18 lb ft) |
| Yoke Retainer Bolt | 25 N.m (18 lb ft) |
Reusable Threaded Fastener Tightening Specification
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Propeller Shaft Front Axle Flange Bolt | 65 N.m (48 lb ft) |
| Front Propeller Shaft Rear Axle Flange Bolt | 65 N.m (48 lb ft) |