Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Differential Drive Pinion Gear Seal |
| Pinion Spacer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Ring Gear Bolts | 170 N.m (125 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Backing Plate Bolt | 130 N.m (96 lb ft) |
| Bearing Cap Bolts 200mm Axle | 53 N.m (39 lb ft) |
| Bearing Cap Bolts 220mm Axle | 100 N.m (74 lb ft) |
| Differential Housing Cover Bolts and Stud | 30 N.m (22 lb ft) |
| Fill Plug | 33 N.m (24 lb ft) |
| Drain Plug | 33 N.m (24 lb ft) |
| Pinion Shaft Lock Bolt - Locking Differential | 22 N.m (16 lb ft) |
| Pinion Shaft Lock Bolt - Open Differential | 22 N.m (16 lb ft) |
| Leaf Spring U-bolts | |
|
80 N.m (59 lb ft) |
|
130 degrees |
| Shock Absorber Bolts | 160 N.m (118 lb ft) |