Side Object Sensor Replacement

Fig 1: Side Object Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Rear Bumper Fascia Replacement
1	Side Object Sensor Procedure Disconnect the electrical connector. Release the locking retainer from the side object sensor bracket. Perform the scan tool learn/reset function:<!--Only use this text string in the 3 testing categories--> Control Module References .

Callout

Component Name

Side Object Sensor

Procedure

Disconnect the electrical connector.
Release the locking retainer from the side object sensor bracket.
Perform the scan tool learn/reset function: Control Module References .