LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P15A3: Stop/Start Select Switch Circuit Signal Message Counter Incorrect >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON
  2. Verify with a scan tool that no DTC is set in the BCM.
    • If no DTC is set 
  3. Verify with a scan tool the Engine Control Module Stop/Start Select Switch parameter changes between Yes and No while pressing the Stop/Start switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing

    • If the parameter changes 
  4. All OK.
scientia non olet · About LEMON Manuals