LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement - Fuel Pump Module to Underbody >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the fuel tank fuel feed pipe (4) to the fuel tank bracket (5) and the fuel pressure sensor clip (3).
    Fig 1: Electrical Connector And Fuel Pressure Sensor Clip
    GM4091454Courtesy of GENERAL MOTORS COMPANY
  2. Connect the electrical connector. (2)
  3. Remove the EN-6015  plugs from all connections.
  4. Connect the fuel tank fuel feed pipe (4) to the fuel tank fuel pump module (1). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Install the fuel tank. (1) Fuel Tank Replacement 
    Fig 2: Suitable Jack, Fuel Tank Straps And Bolts
    GM4091478Courtesy of GENERAL MOTORS COMPANY
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals