LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Express 2500 Base, Van Cargo Extended, 4.8L Eng VIN F >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure: Notes

    Fig 1: BCM And Bracket
    GM923652Courtesy of GENERAL MOTORS COMPANY
  1. Install the BCM (1) into the bracket.

    Ensure the BCM (1) is engaged in the bracket, under the retaining tabs (2).

    2. Fig 2: Body Control Module & Electrical Connectors
    GM923655Courtesy of GENERAL MOTORS COMPANY
  2. Connect the electrical connectors (2) to the BCM (1).
    3. Fig 3: Right Side Knee Bolster Trim Panel
    GM853308Courtesy of GENERAL MOTORS COMPANY
  3. Install the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .
  4. If you replaced the BCM, program the module. Refer to Programming BCM Introduction .
  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals