Sunroof/Sunshade Re-Initialization/Teach Procedure/Reinstallation For an Existing Drive Assembly:

Note:  Perform the initialization/teach procedure on a reinstall sunroof/sunshade motor or a new sunroof/sunshade motor. Ensure the electrical harness on the headliner is connected to the sunroof motor, battery power is applied, and the ignition switch is ON.

1. Press/hold on the Sunshade Close button until the sunshade close/open cycle complete (15 Sec) to activate the Initialization Procedure (Teach).
2. And keep holding the Sunshade switch until the Initialization Procedure is complete (Initialization start).
3. When the sunshade Open and close, the procedure is complete.