Symptoms - Object Detection: Notes
NOTE:
The following steps must be completed before using the symptom tables:
- Perform the Diagnostic System Check - Vehicle
before using the Symptom Tables in order to verify that all of the following are true:
- There are no DTCs set.
- The control modules can communicate via the serial data link.
Note: The rear vision camera does not communicate on the serial data bus.
- Review the system operation in order to familiarize yourself with the system functions. Refer to:
- Adaptive Cruise Control Description and Operation
- Active Safety System Description and Operation (with Active Safety System, UGN, except N America) Active Safety System Description and Operation (with Active Safety System, UGN, N America)
- Cross Traffic Alert Description and Operation
- Forward Collision Alert Description and Operation (with UGN) Forward Collision Alert Description and Operation (without UGN)
- Lane Departure Warning Description and Operation
- Parking Assist Description and Operation (with Front and Rear Parking Assist, UD5) Parking Assist Description and Operation (with Rear Parking Assist, UD7) Parking Assist Description and Operation (with Parallel Parking or Automatic Parking Assist)
- Rear Vision Camera Description and Operation
- Side Blind Zone Alert Description and Operation