LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark EV >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System And Pedestrian Protection System >> Diagnostic Information and Procedures >> Rear Vision Camera System Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

NOTE:

If the condition is intermittent or cannot be duplicated, disconnect the connectors and add Nyogel lubricant 760G. This procedure will correct the high resistance condition due to terminal fretting corrosion.

  1. Ignition ON.
  2. Verify there is no debris on the rearview camera lens and that the bezel and bezel seal are not damaged.
    • If debris are found on the lens 

      Clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.

    • If no debris on the lens 
  3. Engine running, transmission in REVERSE.
  4. Verify the backup lamps are On.
    • If the backup lamps are ON 
  5. Engine running, transmission in REVERSE.
  6. Verify a clear rear vision image is displayed on the radio.
    • If a clear image is not displayed 

      Refer to Circuit/System Testing.

    • If a clear image is displayed 
  7. All OK.
scientia non olet · About LEMON Manuals