LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark EV >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Repair Instructions >> Electronic Parking Brake Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Place the transmission in PARK.
  2. Disable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  3. Place the power button in the OFF position.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  5. Remove the underbody rear air rear deflector. Refer to Underbody Rear Air Rear Deflector Replacement (Rear)Underbody Rear Air Rear Deflector Replacement (Front) .
  6. Fig 1: Parking Brake Rear Cable Nut
    GM3228706Courtesy of GENERAL MOTORS COMPANY
  7. Remove the parking brake rear cable nut (1) from the electronic parking brake control module.
  8. Disconnect the electronic parking brake control module electrical connector.
  9. Fig 2: Electronic Parking Brake Control Module Bracket Nuts
    GM3228707Courtesy of GENERAL MOTORS COMPANY
  10. Remove the electronic parking brake control module bracket nuts (1).
  11. Fig 3: Electronic Parking Brake Control Module
    GM3228710Courtesy of GENERAL MOTORS COMPANY
  12. Lower the electronic parking brake control module (1) from the studs and maneuver the module past the rear impact bar.
  13. Remove the electronic parking brake control module.