LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark EV >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid/EV Control System >> Repair Instructions >> Engine Control Module Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: ECM Module, ECM Module Bracket And Retaining Tab
    GM3232224Courtesy of GENERAL MOTORS COMPANY
  1. Install the ECM module (2) into the ECM module bracket.
    2. Fig 2: Engine Control Module Bracket Retainers And Battery Tray
    GM3216629Courtesy of GENERAL MOTORS COMPANY
  2. Attach the ECM module bracket retainers (3) to the battery tray (2).
    3. Fig 3: ECM Module Bracket, Fastener And Retaining Tab
    GM3232225Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the ECM module bracket to the heater coolant heater bracket with the fastener (1) and retaining tab (2). Tighten the fastener (1) to 9 N.m (80 lb in).
    4. Fig 4: Engine Control Module (ECM) Connectors And ECM Module
    GM3232226Courtesy of GENERAL MOTORS COMPANY
  4. Install the ECM connectors (1) to the ECM module (2).
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals