LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Fuse Block Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Junction Block Nuts And Junction Block Base
    GM4059588Courtesy of GENERAL MOTORS COMPANY
  1. Position the junction block base (2) to the inner wheelhouse stud.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the junction block base nut (1) and tighten to 9 N.m (80 lb in).
    3. Fig 2: Junction Block Bolts And Junction Block
    GM4059587Courtesy of GENERAL MOTORS COMPANY
  3. Install the junction block (2) to the base.
  4. Install the junction block bolts (1) and tighten to 9 N.m (80 lb in).
    5. Fig 3: Positive Battery Cable Nut
    GM4059585Courtesy of GENERAL MOTORS COMPANY
  5. Position the positive battery cable to the junction block.
  6. Install the positive battery cable nut (1) and tighten to 5 N.m (44 lb in).
    7. Fig 4: Junction Block Cover
    GM4059584Courtesy of GENERAL MOTORS COMPANY
  7. Install the junction block cover (1).
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals