Installation Procedure
- Coat the fuel injector seals with engine oil (1).
- Install O-Ring (1) @ Fuel Injector (2) (Qty: 4)
- Install Fuel Injector (3) @ Fuel Injection Fuel Rail (1) (Qty: 4)
- Apply thread locking adhesive to the NEW fuel injector bolts (4) (Qty: 8). Refer to Adhesives, Fluids, Lubricants, and Sealers
- Install and tighten Fuel Injector Bolt (4) @ Fuel Injector (3) (Qty: 8) to 5 N.m (44 lb in)
- Connect Fuel Injector Wiring Harness (2) Connect (Qty: 4)
- Install Fuel Injection Fuel Rail Assembly. Refer to Fuel Injection Fuel Rail Assembly Removal and Installation
NOTE:
The EN-51146-2-5 calibrations tools must be installed.
NOTE:
Do NOT reuse the old bolt.
CAUTION:
Refer to Fastener Caution
NOTE:
Install NEW bolts.