LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Camaro SS, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LT1 LT4) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (Single Transfer Pipe) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Fuel Tank Fuel Pump Module And Seal
    GM4179562Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW Fuel Pump Seal (2).
  2. Install Fuel Tank Fuel Pump Module (1)
    3. Fig 2: Transfer Hose And Fuel Tank Vent Hose
    GM4179561Courtesy of GENERAL MOTORS COMPANY
  3. Connect Fuel Tank Vent Hose (2). Refer to Plastic Collar Quick Connect Fitting Service 
  4. Connect Transfer Hose (1). Refer to Plastic Collar Quick Connect Fitting Service 
    5. Fig 3: Lock Ring
    GM4179557Courtesy of GENERAL MOTORS COMPANY
  5. Use the CH 45722  wrench by turning clockwise and install the lock ring (1).
  6. Install Fuel Pump Fuel Feed Hose. Refer to Fuel Pump Fuel Feed Hose Replacement 
  7. Install Fuel Tank Vent Valve Hose @ Fuel Tank Fuel Pump Module. Refer to Fuel Tank Vent Valve Hose Replacement (Fuel Tank Fuel Pump Module) 
  8. Connect the electrical connector.
  9. Install Fuel Tank. Refer to Fuel Tank Replacement 
scientia non olet · About LEMON Manuals