Fastener Specifications
WARNING: This page is about a different variant/trim than selected.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Retaining Ring |
| Transmission Fluid Cooler Pipe Fitting Seal |
| Transmission Fluid Cooler Inlet and Outlet Pipe Seal |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Transmission Fluid Cooler Pipe Clip Bolt | 9 N.m (80 lb in) |
| Transmission Fluid Cooler Pipe Clip Bolt(LCV) | 58 N.m (43 lb ft) |
| Transmission Fluid Cooler Pipe Clip Bolt(LGZ) | 22 N.m (16 lb ft) |
| Transmission Fluid Cooler Pipe Clip Bolt(LWN) | 11 N.m (8 lb ft) |
| Transmission Fluid Cooler Pipe Bolt | 22 N.m (16 lb ft) |