Removal Procedure
Courtesy of GENERAL MOTORS COMPANY
- Remove Instrument Panel Fuse Block Access Hole Cover (1)
Courtesy of GENERAL MOTORS COMPANY
- Remove the bolt (1).
- Release the 5 retaining tabs (2).
- Remove the left and right front floor console extension panel (3).
Courtesy of GENERAL MOTORS COMPANY
- Remove the left and right instrument panel fuse block access cover frame (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove the bolt (1).
- Remove the 4 retaining clips (2).
- Remove the instrument panel lower trim panel insulator (3).
Courtesy of GENERAL MOTORS COMPANY
- Remove Instrument Panel Lower Airbag Nuts (1)
- Remove Instrument Panel Lower Airbag - Passenger Side (2)
- Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY
- Remove Instrument Panel Outer Trim Cover - Right (2)
- Unlock the retaining tabs (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove Instrument Panel Compartment Bolts (1) (Qty: 5)
- Remove Instrument Panel Compartment (2)
- Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY
- Remove Human Machine Interface Control Module Bracket Bolt (1) @ Human Machine Interface Control Module Bracket (2)
- Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY
- Remove Human Machine Interface Control Module Bracket Bolt (1) @ Human Machine Interface Control Module Bracket (2)
Courtesy of GENERAL MOTORS COMPANY
- Remove Human Machine Interface Control Module Bracket (1)
- Transfer components as necessary.