LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Cruze L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Injection Fuel Rail Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Fuel Injectors And Seals
    GM3216232Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The EN-51146 - 2 - 5  calibrations tools must be installed.

  1. Coat the NEW O-Ring seal (3) with a bit NEW engine oil.
  2. Install O-Ring (1) @Fuel Injector (2)
    3. Fig 2: Fuel Injector Wiring Harness Plugs
    GM2918407Courtesy of GENERAL MOTORS COMPANY
  3. Fuel Injector(3)@Fuel Injection Fuel Rail(1)
    4. NOTE:

    Do NOT reuse old bolts..

  4. Apply thread lock agent to 8 NEW fuel injector bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers .
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install 8 NEW fuel injector bolts to the fuel injectors (3) and tighten to 5 N.m (44 lb in).
  6. Connect the 4 fuel injector wiring harness plugs (2).
  7. Install the fuel injector rail assembly. Refer to Fuel Injection Fuel Rail Assembly Removal and Installation .
scientia non olet · About LEMON Manuals