Removal Procedure

WARNING:

WARNING:

Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
Relieve the fuel pressure:Fuel Pressure Relief
Lower the fuel tank, to get enough space to remove the fuel pressure sensor - fuel feed pipe. Refer to Fuel Tank Replacement .

Fig 1: Electrical Connector And Fuel Pressure Sensor Clip

Courtesy of GENERAL MOTORS COMPANY

Disconnect the fuel tank fuel feed pipe (4) from the fuel tank fuel pump module (1). Refer to Plastic Collar Quick Connect Fitting Service .
Close all connections with EN-6015 plugs.
Disconnect the electrical connector.(2)

NOTE:

The fuel pressure sensor can not be replaced individually.

Unclip the fuel tank fuel feed pipe (4) from the fuel tank bracket (5) and the fuel pressure sensor clip (3).