Installation Procedure
- Install the liftgate window into the opening with an assistant. Refer to Adhesive Installation of Stationary Windows (Rear Window) Adhesive Installation of Stationary Windows (Windshield) Adhesive Installation of Stationary Windows (Liftgate Window) .
- Connect the liftgate window defogger electrical connectors to the bus bars.
- Connect the liftgate window radio antenna electrical connector
- Install Liftgate Upper Side Trim Finish Panel -Liftgate Upper Side Trim Finish Panel Replacement
- Install Rear Window Wiper Motor - Rear Window Wiper Motor Replacement
- Remove the double layer of masking tape around the perimeter of the painted surfaces.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection