Installation Procedure
- Install Adhesive Installation of Stationary Windows (Rear Window) Adhesive Installation of Stationary Windows (Windshield) Adhesive Installation of Stationary Windows (Liftgate Window)
- Install Inside Air Moisture and Windshield Temperature Sensor Replacement
- Install Front View Camera Replacement
- Install Inside Rearview Mirror Replacement
- Install Windshield Garnish Molding Replacement
- Install Air Inlet Grille Panel Replacement
- Install Windshield Side Reveal Molding Replacement
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Connect Battery Negative Cable Disconnection and Connection