Communication Interface Module Battery Replacement

Preliminary Procedure

1. Remove the instrument panel lower airbag - drivers side. Refer to Instrument Panel Lower Airbag Replacement - Driver Side .
2. Remove the instrument panel lower trim panel insulator - left side. Refer to Instrument Panel Lower Trim Panel Insulator Replacement - Left Side .
3. Remove the fasteners for the left floor outlet duct and reposition duct. Refer to Floor Front Air Outlet Duct Replacement - Left Side .

Procedure

1. Disconnect the electrical connector.
2. Depress the two retaining tabs and move the module downward to release it from the bracket.
3. Reprogramming of the module may be necessary after losing battery power.
4. For programming and set up procedures, refer to Control Module References .