General Specifications
WARNING: This page is about a different variant/trim than selected.
| Component | Description | Specification |
|---|---|---|
| Master Cylinder | Type | Compensating Port |
| Bore Size | 19.05 mm | |
| Nominal Stroke | 32 mm | |
| Clutch Actuating Cylinder | Type | Concentric hydraulic actuating cylinder with side bleed port |
| Bore size | Equivalent diameter - 31.8 mm | |
| Stroke | 10.5 mm | |
| Clutch Fluid | Type | DOT 4 hydraulic brake fluid conforming to specification number GMW3356 or HN2456 |
| Clutch Driven Plate | Type | Single plate dry disc |
| Outside Diameter | 290 - mm | |
| Inside Diameter | 174 - mm | |
| Thickness of disc assembly with 13, 500 N load | 9.0 +/ - 0.3 mm | |
| Clutch Pressure Plate | Type | Self-adjusting with pressed steel cover plate and multi-fingered bevelled diaphragm spring |
| Clutch Throw-out Bearing | Type | Ball Race |
| Lubrication | Sealed with grease for life | |
| Actuating Cylinder Guide Sleeve | Lubricant | NLGI No 2 lithium soap based EP grease with molybdenum disulphide, such as Shell Retinax HDX2 grease, BP Energrease LMS-EP23 or equivalent |