Removal Procedure

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

Fig 1: Battery Positive Cable, Protective Cover & Fastener

Courtesy of GENERAL MOTORS COMPANY

Remove the protective cover (2) to the battery positive cable (3).
Remove the fastener (1) connecting the battery positive cable (3) to the passthrough stud.

Fig 2: Battery Positive Extension Cable & Passthrough Stud

Courtesy of GENERAL MOTORS COMPANY

Remove the protective sleeve covering the battery positive extension cable (2).
Remove the passthrough stud (1) and remove the battery positive extension cable (2).

Fig 3: Battery Positive Extension Cable Retainers

Courtesy of GENERAL MOTORS COMPANY

Fig 4: Battery Positive Cable Junction Block Stud & Cover

Courtesy of GENERAL MOTORS COMPANY

Remove the junction block cover (1) and remove the battery positive cable junction block stud (2).
Remove the engine wiring and battery positive cable with the attached mega fuse case (3), from the junction block (4).

Fig 5: Starter Solenoid Wiring Harness, Extension Cable & Junction Block

Courtesy of GENERAL MOTORS COMPANY

Remove the starter solenoid wiring harness (1) and the battery positive extension cable (2), from the junction block (3).

Fig 6: Battery Positive Extension Cable & Conduit

Courtesy of GENERAL MOTORS COMPANY

Detach the battery positive extension cable (1) from the harness cable conduit (2).
Remove the battery positive cable (1) from the engine compartment.