Remote Control Door Lock Receiver Replacement

Fig 1: Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Lower the rear of the headlining trim panel to gain access to the receiver. Refer to Headlining Trim Panel Replacement (Crew Cab Without Sunroof)Headlining Trim Panel Replacement (Crew Cab With Sunroof)Headlining Trim Panel Replacement (Extended Cab)Headlining Trim Panel Replacement (Regular Cab) .
1	Remote Control Door Lock Receiver Procedure Disconnect the electrical connector. Release tabs on receiver to remove from the roof rear header panel.

Callout

Component Name

Remote Control Door Lock Receiver

Procedure