Rearview Driver Information Camera Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the pickup box endgate access hole cover panel. Refer to Pickup Box Endgate Access Hole Cover Panel Replacement . |
|
| 1 | Rearview Driver Information Camera Fastener (Qty: 2)
CAUTION:
Refer to Fastener Caution . |
| 2 | Rearview Driver Information Camera Procedure Disconnect the electrical connector.
NOTE:
The connector is plugged into a junction center under the rear of the pickup box. Attach a leader wire or string to the old connector before removing the harness and use this to route the harness for the replacement camera. |