Installation Procedure
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Install the wheel speed sensor (1) to the vehicle.
- Connect the electrical connector.
- Install the wiring harness retainers to the frame.
Install the wheel speed sensor (1) to the steering knuckle.
- Install the wheel speed sensor screw (2) and tighten to 6 N.m (53 lb in).
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
CAUTION:
Refer to Fastener Caution .