Fastener Specifications
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Driver or Passenger Seat Side Inflatable Restraint Module Nut | 3.75 N.m (33 lb in) |
| Front End Inflatable Restraint Discriminating Sensor | 7.5 N.m (66 lb in) |
| Front Seat Belt Anchor Plate Tensioner Bolt | 45 N.m (33 lb ft) |
| Front Seat Belt Tensioner Bolt | 5 N.m (44 lb in) |
| Inflatable Restraint Front Side Door Side Impact Sensor Fastener | 7.5 N.m (66 lb in) |
| Inflatable Restraint Sensing and Diagnostic Module | 10 N.m (89 lb in) |
| Inflatable Restraint Side Impact Sensor Nut | 7.5 N.m (66 lb in) |
| Instrument Panel Inflatable Restraint Module Fastener | 5 N.m (44 lb in) |
| Instrument Panel Tie Bar Brace Fastener | 22 N.m (16 lb ft) |
| Roll Bar Bolt | 36 N.m (27 lb ft) |
| Steering Wheel Inflatable Restraint Module Coil | 1.5 N.m (13 lb in) |