Installation Procedure

Install the battery negative cable (1) onto the battery current sensor (2) as shown.

Fig 1: Battery Current Sensor And Battery Negative Cable
Courtesy of GENERAL MOTORS COMPANY
Install the battery negative cable to the frame rail and tighten the battery negative and positive cable ground nut (3) to 22 N.m (16 lb ft).

Fig 2: Body Harness Connector And Battery Current Sensor
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Connect the body harness connector (1) to the battery current sensor (2).
Install the battery negative cable (4).

Fig 3: Battery Negative Cable
Courtesy of GENERAL MOTORS COMPANY
Install the battery negative cable nut (2) and tighten the nut to 6 N.m (53 lb in).
Install the body wiring harness cable (3).
Install the body wiring harness cable nut (1) and tighten the nut to 6 N.m (53 lb in).
Install the battery. Refer to Battery Replacement .