LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Cellular System, Entertainment System, And Navigation System >> Diagnostic Information and Procedures >> OnStar Button LED Malfunction >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the inside rearview mirror.
  2. Doors closed, courtesy lamps OFF, test for less than 10 Ω between the ground circuit terminal 8 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Ignition ON, command the green LED OFF with a scan tool. Test for less than 1 V between the control circuit terminal 14 and ground.
    • If greater than the specified range, test the control circuit for a short to voltage. If the circuit tests normal, replace the CIM.
  4. Command the green LED ON with a scan tool. Test for greater than 9 V between the control circuit terminal 14 and ground.
    • If less than the specified range, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the CIM.
  5. Command the red LED OFF with a scan tool. Test for less than 1 V between the control circuit terminal 15 and ground.
    • If greater than the specified range, test the control circuit for a short to voltage. If the circuit tests normal, replace the CIM.
  6. Command the red LED ON with a scan tool. Test for greater than 9 V between the control circuit terminal 15 and ground.
    • If less than the specified range, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the CIM.
  7. If all circuits test normal, replace the inside rearview mirror.
scientia non olet · About LEMON Manuals