LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Intake & Exhaust Camshaft Position (CMP) Sensors - Bank 1 (Right Side) Intake
    GM1860428Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the engine wiring harness electrical connector (1) from the bank 1 intake camshaft position (CMP) sensor (2).
    2. Fig 2: CMP Sensor Bolt & Sensor - Bank 1 (Right Side) Intake
    GM1860459Courtesy of GENERAL MOTORS COMPANY
  2. Remove the CMP sensor bolt and sensor (2).
scientia non olet · About LEMON Manuals