Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Intermediate Steering Shaft Upper Bolt | |
|
25 N.m (18 lb ft) |
|
180 - 195 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Instrument Panel Cluster Trim Plate Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Steering Column Lower Trim Cover Bolt | 2.5 N.m (22 lb in) |
| Intermediate Steering Shaft Lower Bolt | 58 N.m (43 lb ft) |
| Steering Column Nut | 22 N.m (16 lb ft) |
| Steering Wheel Bolt | 45 N.m (33 lb ft) |
| Steering Wheel Spoke Cover Fastener | 1.5 N.m (13 lb in) |