Installation Procedure
- Assemble the Front Floor Console Accessory Bracket (2) to the Wireless Charging System Module (3).
- Install Front Floor Console Bracket Bolt (1) and tighten 1 N.m (9 lb in)
- Connect the Front Floor Console Housing Assembly (1) to the Radio Cooling Duct (2).
- Connect the electrical connector.
- Install Front Floor Console Bracket Bolt (1) and tighten 2.5 N.m (22 lb in)
- Install Front Floor Rear Console Side Trim Panel Replacement - Right Side
- Install Front Floor Rear Console Side Trim Panel Replacement - Left Side