LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2 >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: EGR Cooler Temperature Sensor, EGR Cooler, Wiring Harness Clip And Electrical Connector
    GM4091553Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  1. Install Exhaust Gas Recirculation Cooler Temperature Sensor (2) and tighten 42 N.m (31 lb ft)
  2. Exhaust Gas Recirculation Cooler Temperature Sensor (2) @Wiring Harness Clip (4)
  3. Connect the electrical connector.(1)
  4. Install Three-Way Catalytic Converter Replacement
  5. Install Intake Manifold Cover Replacement
  6. Connect Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals