LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid/EV Control System >> Diagnostic Information and Procedures >> Drive Mode Select Switch Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Run the vehicle in propulsion system active mode for 1 minute, then vehicle OFF for 30 seconds.
  2. Verify the scan tool BCM Drive Mode Select Switch parameter displays Inactive when DRIVE MODE button is not pressed and Active when pressed and held.
    • If the BCM Drive Mode Select Switch parameter does not indicate the correct status 

      Refer to Circuit/System Testing.

    • If the BCM Drive Mode Select Switch parameter indicates the correct status 
  3. All OK.
scientia non olet · About LEMON Manuals