Installation Procedure

Fig 1: Steering Column

Courtesy of GENERAL MOTORS COMPANY

Fig 2: Steering Column Nuts With Tightening Sequence

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Install and tighten Steering Column Nuts (1) (Qty: 4) in sequence to 22 N.m (16 lb ft)
Connect the steering column electrical connectors.

Fig 3: Intermediate Steering Shaft

Courtesy of GENERAL MOTORS COMPANY

Install Intermediate Steering Shaft (1) @ Steering Column. Refer to Intermediate Steering Shaft Replacement

Fig 4: Steering Column Lower Trim Cover

Courtesy of GENERAL MOTORS COMPANY

Install Steering Column Lower Trim Cover (1). Refer to Steering Column Lower Trim Cover Replacement

Fig 5: Floor Front Air Outlet Duct - Left Side

Courtesy of GENERAL MOTORS COMPANY

Install Floor Front Air Outlet Duct - Left Side (1). Refer to Floor Front Air Outlet Duct Replacement - Left Side

Fig 6: Instrument Panel Lower Airbag - Driver Side

Courtesy of GENERAL MOTORS COMPANY

Install Instrument Panel Lower Airbag - Driver Side (1). Refer to Instrument Panel Lower Airbag Replacement - Driver Side

Fig 7: Instrument Panel Knee Bolster

Courtesy of GENERAL MOTORS COMPANY

Install Instrument Panel Knee Bolster (1). Refer to Instrument Panel Knee Bolster Replacement
Install the steering column lock control module fuse.
Program the steering column lock control module. Refer to Control Module References
Center the steering angle sensor. Refer to Steering Wheel Angle Sensor Centering