Installation Procedure
Support the fuel tank with a suitable jack.
- Fuel Tank (1) - Install
Fuel Tank Strap (3) - Install [2x]
- Fuel Tank Strap Bolt (2) - Install [2x] 27 N.m (20 lb ft)
- Fuel Tank Strap Bolt (1) - Install [3x] 22 N.m (16 lb ft)
Evaporative Emission Pipe (2) Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Feed Pipe (1) Connect - Plastic Collar Quick Connect Fitting Service
Evaporative Emission Canister Purge Hose (4) - Connect - Plastic Collar Quick Connect Fitting Service
- Evaporative Emission Canister Hose (3) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Filler Hose (2) - Install
- Fuel Tank Filler Hose Clamp (1) - Install 3.5 N.m (31 lb in)
Electrical Connector (1) - Connect
- Transmission Fluid Cooler Pipe - Mid Line Left and Mid Line Right - Install - Transmission Fluid Cooler Pipe Replacement (LT4 With MJK and KNR, LT1 With MM6, With KNR, Mid Line Left)Transmission Fluid Cooler Pipe Replacement (LT4 With MJK and KNR, LT1 With MM6, With KNR, Mid Line Right)Transmission Fluid Cooler Pipe Replacement (LT1 With M5U, With KNR, Mid Line Left)Transmission Fluid Cooler Pipe Replacement (LT1 With M5U, With KNR, Mid Line Right)Transmission Fluid Cooler Pipe Replacement (LT4 With MGL or MH3, With KNR, Mid Line Left)Transmission Fluid Cooler Pipe Replacement (LT4 With MGL or MH3, With KNR, Mid Line Right)
- Install the left front rear suspension bracket. Rear Suspension Bracket Replacement (Front)
- Two-Piece Propeller Shaft - Install - Two-Piece Propeller Shaft Replacement (Coupe MM6, M13, MJK)Two-Piece Propeller Shaft Replacement (Convertible MM6, M13, MJK)Two-Piece Propeller Shaft Replacement (Coupe M5T, M5U, MGL)Two-Piece Propeller Shaft Replacement (Convertible M5T, M5U, MGL)
- Refill the fuel tank.
- Inspect for fuel leaks.
CAUTION:
Refer to Fastener Caution .