LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Corvette Stingray, 2D Convertible, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Control Module Bracket Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
  2. Instrument Panel Insulator Panel Replacement - Left Side - Remove
  3. Instrument Panel Knee Bolster Replacement - Remove
  4. Disconnect the electrical connectors from the steering column control module and bracket.
  5. GM3407265

    Steering Column Control Module Bracket Bolt (1) - Remove[2x]

  6. Steering Column Bracket Bolt (2) - Remove
  7. Steering Column Control Module Bracket (3) - Remove
  8. Transfer components as necessary.
scientia non olet · About LEMON Manuals