LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Engine Control Module and Electronic Brake Control Module Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. GM3680284

    Install the engine control module and electronic brake control module bracket (1) to the transmission mount (4).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 2 engine control module and electronic brake control module bracket bolts (2, 6) and tighten to 12 N.m (106 lb in).
  3. Clip in the body wiring harness connector (5).
  4. Body Wiring Harness(3) - Install[2x]
  5. GM3707209
  6. Clip in the engine wiring harness (1) to the engine control module and electronic brake control module bracket (3).
  7. Clip in battery positive and negative cable (3) from the engine control module and electronic brake control module bracket (1).
  8. GM3680283

    Engine Wiring Harness(1) - Install

  9. Connect the engine wiring harness connector (4) to the body wiring harness connector (3).
  10. Clip in the body wiring harness connector (3) to the engine control module and electronic brake control module bracket (2)
  11. Transmission Control Module Bracket - Install - Transmission Control Module Bracket Replacement
  12. Engine Control Module Bracket - Install - Engine Control Module Bracket Replacement 
scientia non olet · About LEMON Manuals