LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Engine Control Module and Electronic Brake Control Module Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Engine Control Module Bracket - Remove - Engine Control Module Bracket Replacement 
  2. Transmission Control Module Bracket - Remove - Transmission Control Module Bracket Replacement
  3. GM3680283

    Clip out the body wiring harness connector (3) from the engine control module and electronic brake control module bracket (2).

  4. Disconnect the engine wiring harness connector (4) from the body wiring harness connector (3).
  5. Engine Wiring Harness(1) - Unclip
  6. GM3707209

    Clip out the engine wiring harness (1) from the engine control module and electronic brake control module bracket (3).

  7. Clip out battery positive and negative cable (2) from the engine control module and electronic brake control module bracket (3).
  8. GM3680284

    Body Wiring Harness(3) - Unclip[2x]

  9. Clip out the body wiring harness connector (5).
  10. Remove the 2 engine control module and electronic brake control module bracket bolts (2, 6).
  11. Remove the engine control module and electronic brake control module bracket (1) from the transmission mount (4).
scientia non olet · About LEMON Manuals