LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Injection Fuel Rail Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING:

Refer to Diesel/Gasoline Vapors Warning .

WARNING:

Refer to Safety Goggles and Fuel Warning .

CAUTION:

When working on the fuel rail and fuel injectors, always maintain a clean work surface. Failure to maintain a clean work surface can result in contaminant on the injector seals and cause leaks.

  1. Remove the fuel injection fuel rail assembly. Fuel Injection Fuel Rail Assembly Removal and Installation .
  2. GM2918404
    NOTE:

    The EN-51146 - 2 - 5  calibrations tools must be installed.

    Remove the 8 plate bolts (1) and remove the EN-51146-1-2  plate (2), counterhold with a wrench (4) at the EN-51146-1-1  supports (3).

  3. Remove the 8 EN-51146-1-1  supports (3).
  4. GM2918407

    Disconnect the 4 fuel injector wiring harness plugs (2).

  5. Fuel Injector(3)@Fuel Injection Fuel Rail(1) - Remove[4x]
  6. GM3216232

    O-Ring(1)@Fuel Injector(2) - Remove and DISCARD

scientia non olet · About LEMON Manuals