LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Injector Wiring Harness Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Fuel Injection Fuel Rail Assembly Removal and Installation  - Remove
  2. GM3682588

    Disconnect the fuel injection fuel rail fuel pressure sensor wiring harness plug (1) from the fuel rail fuel pressure sensor (2).

  3. Cut the cable tie (3).
  4. GM3682583

    Remove 4 the fuel injector wiring harness (3) from the fuel injector (4).

  5. Clip out the fuel injector wiring harness (2) from the fuel rail.
  6. Cut the 7 cable ties (1, 5).
scientia non olet · About LEMON Manuals