Installation Procedure
Install a NEW throttle body assembly seal.(3)
- Throttle Body Assembly(2) - Install
- Throttle Body Assembly Bolt(1) - Install and tighten 10 N.m (89 lb in) [4x]
- Electrical Connector(4) - Connect
- Wiring Harness(5) - Install
- Charge Air Cooler Outlet Air Hose Replacement - Install
- Engine Sight Shield Replacement - Install
- Perform the intake system learned values reset. Intake System Learned Values Reset
- Perform the throttle body idle air flow compensation reset. Throttle Body Idle Air Flow Compensation Reset
CAUTION:
Refer to Fastener Caution .