Installation Procedure
Remove the special tool: EN-6015 plugs
- Fuel Feed Front Pipe(2)@Fuel Feed Pipe(1) - Connect - Metal Collar Quick Connect Fitting Service
Remove the special tool: EN-6015 plugs
- Fuel Feed Front Pipe(1)@Fuel Pump(2) - Connect - Metal Collar Quick Connect Fitting Service
Fuel Pump Insulator(3)@Fuel Pump(1) - Install
- Connect the electrical connector.(2)
Engine Wiring Harness Bracket - (2)Install
- Engine Wiring Harness Bracket Bolt(1) - Install and tighten[2x] 9 N.m (80 lb in)
- Charge Air Cooler Outlet Air Hose - Install - Charge Air Cooler Outlet Air Hose Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Start the engine and check for fuel leaks.
CAUTION: