Installation Procedure
Hand start the glow plugs (1) into the cylinder head. [4x]
- Tighten the glow plugs to 11 N.m (97 lb in).
CAUTION:Refer to Component Fastener Tightening Caution .
Diesel Glow Plug Wiring Harness (1) - Connect [4x]
Diesel Fuel Separator (2) - Install
- Exhaust Temperature Sensor Bracket (3) - Install
- Auxiliary Heater Inlet and Outlet Hose Clip Nut (1) - Install and tighten [2x] 5.5 N.m (49 lb in)
- Fuel Injector Deadener Replacement - Install
CAUTION:
Refer to Fastener Caution .