Fastener Specifications
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Brake Caliper Bracket Bolt | |
|
150 N.m (111 lb ft) |
|
45-60 degrees |
| Rear Brake Caliper Bracket Bolt | |
|
100 N.m (74 lb ft) |
|
60-75 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Bleeder Valve | 17 N.m (13 lb ft) |
| Brake Hose to Brake Caliper Bolt | 40 N.m (30 lb ft) |
| Brake Pipe Nut | 18 N.m (13 lb ft) |
| Front Brake Caliper Guide Pin Bolt | 28 N.m (21 lb ft) |
| Front Brake Rotor Bolt | 9 N.m (80 lb in) |
| Rear Brake Caliper Guide Pin Bolt | 28 N.m (21 lb ft) |
| Rear Brake Rotor Bolt | 9 N.m (80 lb in) |
| Vibration Dampener Stud | 28 N.m (21 lb ft) |
| Vibration Dampener to Stud | 9 N.m (80 lb in) |
| Wheel Speed Sensor Bolt | 6 N.m (53 lb in) |