LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Power Steering System) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

Application
NOTE: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 
Steering Gear Boot Inner Clamp
Reusable Threaded Fastener Tightening Specifications

Application Specification
Metric (English)
NOTE: All fasteners listed in this table can be reused after removal. 
Electronic Power Steering Motor Control Module Bracket Bolt 18 N.m (13 lb ft)
Electronic Power Steering Motor Control Module Mounting Bolt 3 N.m (27 lb in)
Steering Gear Bolt
  • First Pass:
100 N.m (74 lb ft)
  • Final Pass:
90 - 105 Degrees
Steering Linkage Inner Tie Rod 88 N.m (65 lb ft)
Steering Linkage Inner Tie Rod Jam Nut 75 N.m (55 lb ft)
Steering Linkage Outer Tie Rod Nut
  • First Pass:
30 N.m (22 lb ft)
  • Final Pass:
120 - 130 Degrees