Fastener Specifications
WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Air Inlet Valve Actuator Screw | 1.3 N.m (12 lb in) |
| Auxiliary Air Conditioning Evaporator and Blower Module Bolt (C69) | 2.5 N.m (22 lb in) |
| Auxiliary Air Conditioning Evaporator and Blower Module Nut (C69) | 9 N.m (80 lb in) |
| Auxiliary Heater and Air Conditioning Control Bolt (C69) | 1.0 N.m (9 lb in) |
| Ground Nut | 9 N.m (80 lb in) |
| Heater and Air Conditioning Mode Control Cam Cover Bolt (CJ2) | 2.5 N.m (22 lb in) |
| Heater and Air Conditioning User Interface Control Bolt (CJ2) | 2.5 N.m (22 lb in) |
| Mode Valve Actuator Bolt (CJ2) | 1.3 N.m (12 lb in) |
| Mode Valve Actuator Bolt (C69) | 1.5 N.m (13 lb in) |
| Temperature Valve Actuator Bolt (CJ2) | 1.3 N.m (12 lb in) |
| Temperature Valve Actuator Bolt (C69) | 1.5 N.m (13 lb in) |