Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Electronic Brake Control Module (1) - Install
Fig 1: Electronic Brake Control Module Bolts Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

NOTE:
A new EBCM may not have threaded inserts. Refer to the Electronic Parts Catalog and use new self tapping fasteners to form the threads.

Electronic Brake Control Module Bolt (1) - Install and tighten in sequence [4x]
1. First Pass: 1.5N.m (13 lb in)
2. Second Pass: 2.5N.m (22 lb in)
3. Final Pass: 3.5N.m (31 lb in)
Electronic Brake Control Module with Brake Pressure Modulator Valve - Install - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
Program the Electronic Brake Control Module. Control Module References
Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , or Hydraulic Brake System Bleeding (Pressure)