Circuit/System Description
For an overview of the component/system, refer to: Drive Mode Description and Operation
| Circuit | Description |
|---|---|
| 5 V Reference | Regulated voltage supplied by the control module. |
| Signal | The control module input circuit has an internal resistance connected to ground. |
| Ground | Chassis Ground |
| Component | Description |
|---|---|
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. |
| S126 Drive Mode Select Switch | The switch S126 has an internal resistor ladder network. A specific resistance is generated dependent on the position of the switch. |